TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 168 of 323
CHAP 5, SEC XVIII REAR HOUSING REBUlLD PAR 156 Figure 192. Installing right- and left-brake apply shafts u. Install the right-brake apply shaft as- sembly onto left-brake apply shaft (fig. 183). Note. Be careful to avoid damaging the oil seal in the right apply shaft on the splines of the left apply shaft (fig. 183). v. Install the spring on the right-brake cam assembly and position in the transmission rear housing (fig. 192). w. Install the right- and left-brake apply shafts, indexing the blind splines on the shafts with the two pins located in the right- and left- brake cam assemblies (fig. 1 2). x. Install brake apply shaft retainer and gasket (fig. 181). y. Secure with three 3/8-16 bolts and lock washers. Torque to 26-32 pound-feet. z. Position the rear housing on its left side and install 12 steel balls in the right- stationary cam ring (fig. 193). aa. Install right-brake apply cam rotating ring (fig. 193). 136 Figure 193. Installing right-brake apply cam rotating ring ab. Install a wood block in the rear hous- ing, to retain the right-brake apply cam ro- tating ring temporarily (fig. 194). ac. Turn the rear housing over to rest on its right side. Block the housing as neces-