TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 159 of 323
*C2 *C2 *C2 *C2 PAR 146 RIGHT OUTPUT REBUILD CHAP 5, SEC XVI Figure 172. Installing output coupling n. Install nine steer clutch piston return springs (fig. 168). o. Using sling 7083778 and three 7/16-14 bolts, install clutch reaction plate assembly (fig. 169). Note. Aline index mark on plate with mark on end cover. p. Install the right-brake anchor ring (fig. 170). q. Install 18 bolts (two different lengths) that retain the brake anchor ring (fig. 170). Remove guide bolt 8351231 and install remain- ing bolt. Torque the bolts to 42-50 pound-feet. r. Using hoist and sling 8351496, install the right-steer planetary carrier and brake hub assembly (fig. 171). s. Install output coupling onto carrier output shaft (fig. 172). Caution: Rotate output shaft and tap coupling lightly with soft mallet, being careful not to damage the oil seal. t . Install lock plate and 3/4-16 x 2-3/4 self-locking bolt (fig. 173). Tighten bolt only finger-tight at this time. Temporarily install coupling retainer and coupling nut. Figure 173. Installing output coupling lock plate and retaining bolt Figure 174. Installing right-brake plates and disks u. Install 10 internal- and 10 external- splined brake plates and disks, beginning with an external-splined brake plate (fig. 174). 127