TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 134 of 323
*C2 CHAP 5, SEC II DISASSEMBLY PAR 76, STEPS 6-9 Figure 136 (Step 8) Figure 134 (Step 6) Place an index mark (A) across output drive saddle (B)-to-housing (C) split line. Remove saddle (B). Figure 135 (Step 7) Position output drive saddle assembly (A) on wooden blocks (B). Remove remaining two bolts (C) and washers (D). Using sling (A) and two 7/8-14 x 6-inch bolts (B), raise the assembly and drive output drive planetary carrier (C) from saddle assembly (D). Place index marks (E) on the saddle and carrier assembly, then remove saddle as- sembly (D). Figure 137 (Step 9) Straighten the tabs on lock strips (A). Using a 15/16-inch wrench, remove four bolts (B), lock strips (A) and lock plate (C). 102