TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 133 of 323
PAR 76, STEPS 2-5 DISASSEMBLY CHAP 5, SEC II Figure 130 (Step 2) Remove the input shaft (A) from left-output drive assembly (B). Figure 132 (Step 4) Using sling (A) and two 3/8-24 x 1 bolts (B) and flat washers, place the assembly in an improvised stand (C). Figure 131 (Step 3) Using lifting eye (A) and sling (B) to prevent the drive assembly from turning, and using a 1-1/8-inch wrench, loosen 24 bolts (C). Figure 133 (Step 5) Remove twenty-two bolts (A) and washers (B), leaving two of the bolts (C), 180 degrees apart. Remove three screws (D). 101