TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 131 of 323
*C2 *C2 PAR 75, STEPS 59-62 DISASSEMBLY CHAP 5, SEC II Figure 123 (Step 59) Remove intermediate-range c1utch anchor bolt (A). Remove clutch anchor (B) and oil collector (C). Figure 125 (Step 61) Using sling (A) and hooks (B), remove high- range clutch assembly (C). Figure 124 (Step 60) Remove snap ring (A) retaining low-range sun gear (B). Remove low- (B) and intermediate- (C) range sun gears. Figure 126 (Step 62) Block up the turbine shaft with a wooden block (A). Using a 7/16-inch wrench, remove two self-locking bolts (B) and flat washers. 99