TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 130 of 323
CHAP 5, SEC II DISASSEMBLY PAR 75, STEPS 55-58 Figure 119 (Step 55) Remove low-range clutch anchor bolt (A). Re- move clutch anchor (B). Using a 9/16-inch wrench, remove intermediate-range clutch anchor bolt (C), lock washer and flat washer. Figure 120 (Step 56) Remove intermediate-range clutch piston housing assembly (A) and Belleville spring (B). Figure 121 (Step 57) Remove intermediate-range clutch apply plate (A). Remove ring gear assembly (B) with one external-splined (C) and one internal-splined (D) clutch plate. Figure 122 (Step 58) Remove remaining two external-splined (A) and internal--splined (B) clutch plates. Using a 15/16-inch wrench, remove intermediate- range clutch anchor nut (C) and flat washer. 98