TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 129 of 323
PAR 75, STEPS 51-54 DISASSEMBLY CHAP 5, SEC II Figure 115 (Step 51) Position the assembly on the disassembly table and remove the hoist and lifting eye. Remove low- and reverse-range clutch piston housing assembly (A). Figure 116 (Step 52) Remove snap ring (A) retaining reverse-range sun gear (B). Remove reverse-range sun gear. Figure 117 (Step 53) Remove low-range carrier and shaft assem- bly (A). Remove thrust washer (B) from carrier. Figure 118 (Step 54) Remove four external- (A) and four internal- (B) splined low-range clutch plates. Using a 15/16-inch wrench, remove low-range clutch anchor nut (C) and flat washer. 97