TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 128 of 323
*C2 CHAP 5, SEC II DISASSEMBLY PAR 75, STEPS 47-50 Figure 111 (Step 47) Figure 113 (Step 49) Using a wooden block (A) and screwdriver, pry up on reverse-range support housing and carrier assembly (B) enough to attach sling (C) with two bolts and nuts. Remove support housing and carrier assembly (B). Remove reverse-range ring gear assembly (A) and one internal-splined clutch plate (B) Using a 9/16-inch wrench, remove reverse- rance anchor bolt (C), and lock washer and flat washer. Remove remaining reverse- range clutch plates (D) Figure 112 (Step 48) Remove spacer (A) and thrust washer (B) from reverse-range sun gear (C). Figure 114 (Step 50) Using hoist and lifting eye (A), remove low- and intermediate-range carriers, and low and reverse-range clutch piston housing as an as- sembly (B). Caution: Be careful that low- range clutchplates (C) do not fall out with re- moval of assembly (B). 96