TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 123 of 323
PAR 75. STEPS 27-30 DlSASSEMBLY CHAP 5, SEC II Figure 91 (Step 27) Figure 93 (Step 29) Attach sling (A), and, using a 5/8-inch wrench, remove 27 bolts (B), four bolts (C) and three bolts (D) and 34 lock washers. Remove lifting bracket (E). Use three bolts (B) as jack- screws in holes (F), to loosen output housing. Using wrench (A), apply transmission right brake. Using a l-inch wrench, remove bolt (B), lock plate (C) and output coupling (D). Figure 94 (Step 30) Figure 92 (Step 28) Using a 9/16-inch wrench, remove six bolts (A) and lock washers (B) retaining accumulator body (C). Remove accumulator body and gas- ket (D). Remove right-output housing assembly (A) and gasket (B). Remove out put transfer drive shaft (C). Using a 1-inch wrench, remove bolt (D) and lock plate (E) retaining brake coolant oil pump drive gear (F). 91