TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 111 of 323
*C2 PAR 74, STEPS 5-8 DISASSEMBLY CHAP 5, SEC II Figure 43 (Step 5) Remove input and scavenge oil pump assembly (A) and gasket (B). Remove seal ring (C) from input transfer housing assembly. Figure 44 (Step 6) Straighten corners of lock strip (A). Using a 9/16-inch wrench, remove two bolts (B). Re- move lock strip (A) and strap (C) retaining idler cluster gear spindle (D). Figure 45 (Step 7) Using two 3/8-16 bolts and flat washers, at- tach sling (A) to input transfer housing (B). Position the housing assembly on the dis- assembly table, supporting torque converter (C), and keeping the transfer housing assembly level. Figure 46 (Step 8) Using a 9/16-inch wrench, remove eight bolts and lock washers (A) from converter bearing cover (B). Remove cover (B) and gasket (C). 79