TM-9-2520-234-35 Technical Manual for M109 Transmission XTG-411-2A Download
Page 110 of 323
*C2 *C2 CHAP 5, SEC II DISASSEMBLY PAR 74, STEPS 1-4 74. DISASSEMBLY STEPS - INPUT TRANSFER ASSEMBLY Figure 39 (Step 1) Using hoist (A), sling (B), and bracket (C), position the power train assembly on blocks (D) on the floor or disassembly table, Re- move the sling and bracket. Figure 40 (Step 2) Remove input transfer assembly (A) and gas- Attach sling (A) to the input transfer housing. Using a 5/8-inch wrench, remove 16 input transfer-to-converter housing bolts and lock washers (B). 78 Figure 41 (Step 3) Using a 5/8-inch wrench, remove 10 input transfer-to-converter housing bolts and 10 lock washers (A). Remove engine coupling shaft (B). Figure 42 (Step 4) ket (B). Using a 9/16-inch wrench, remove 11 bolts and lock washers (C) retaining input and scavenge oil pump assembly. If neces- sary, use two mounting bolts as jackscrews, in holes (D).