TM-9-2350-358-BD M109A6 Battlefield Damage Assessment and Repair Download
Page 78 of 343
TM 9-2350-358-BD 3-27. PULLEY, DAMAGED - CONTINUED 2. Grease cable and place on pulley. 3. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. Option 2 Limitations: Cable life will be decreased. Personnel/Time Required: • 1-2 soldiers • Time determined by location and amount of damage Materials/Tools: • Bolt (scavenge from available source) • Flat washers, two required (scavenge from available source) • Grease, aircraft (item 33, Appendix C) Procedural Steps: 1. Replace pulley with bolt and two flat washers. 2. Grease cable and place between two flat washers. 3. Adjust cable to proper tension, if possible. 4. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. 3-28. MECHANICAL CABLE, BROKEN Mechanical cables can be severed or damaged in battlefield conditions. Cable should be replaced when damaged. When replacement cable is not available, splice broken cables. Option 1 Limitations: None Personnel/Time Required: • 1 soldier • 0.5 hour Materials/Tools: • Clamp, cable, eight required (scavenge from available source) • Wire, braided (scavenge from available source) 3-33