Sign up to sell your inventory with NSN Lookup

TM-9-2350-358-BD M109A6 Battlefield Damage Assessment and Repair Download

Page 52 of 343

TM 9-2350-358-BD 3-9. CONNECTOR PIN, BROKEN, DAMAGED, OR MISSING - CONTINUED 6. Splice and tape wire at both ends (para 3-10). 7. Secure loose wire to connector with tape. 8. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. Option 2 Limitations: None Personnel/Time Required: • 1 soldier • 0.5 hour Materials/Tools: Tape, insulation, electrical (item 63, Appendix C) Procedural Steps: 1. Turn off MASTER power switch. 2. Cut wires to remove damaged connectors. 3. Splice corresponding wires (para 3-10). 4. Wrap tape around first splice and leave hanging. 5. Cut and splice next corresponding wire, approximately 1 inch from first splice. 6. Wrap tape around second spice without breaking tape from first splice. 7. Repeat these steps until all splices are complete. 8. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. 3-7