TM-9-2350-358-BD M109A6 Battlefield Damage Assessment and Repair Download
Page 295 of 343
TM 9-2350-358-BD 14-9. MCS COMPRESSOR/MOTOR V-BELT DAMAGED - CONTINUED 2. Remove damaged belt. 3. Get 1/2-inch V-belt from M2/3 generic BDR kit and remove or add links as necessary to achieve the required length using kit instructions. 4. Mount belt on compressor and motor. 5. Adjust belt to proper tension. 6. Tighten all 6 screws on motor base making sure tension on belt remains correct. 7. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. SECTION III. PERSONNEL HEATER 14-10. GENERAL The personnel heater supplies warm air for the cab enclosure allowing more efficient performance of the crew, and ensuring proper operating temperatures for the equipment. Failure of the heater in a cold climate will reduce crew efficiency and performance and may reduce the effectiveness of the equipment. 14-11. IN-LINE FILTER ELEMENT CLOGGED General Information: Water and contaminates are removed from the fuel by the personnel heater in-line filter element. Contaminates collected in the in-line fuel filter can cause loss of pressure and reduce fuel flow. Also at low temperatures, water accumulated in the fuel filter bowl may freeze blocking fuel flow to the personnel heater. Limitations: Personnel heater fuel filtration will be reduced. Personnel/Time Required: • 1 soldier • 0.3 hour 14-4