TM-9-2350-358-BD M109A6 Battlefield Damage Assessment and Repair Download
Page 285 of 343
TM 9-2350-358-BD Limitations: • Preferred method - none • Alternate methods - possible lowered volume Personnel/Time Required: • 1 soldier • 0.4 hour Materials/Tools: • Preferred method: Box, control, C-10456 or C-2298 VRC (scavenge from available source) • Alternate method: Solder, lead-tin alloy (item 58, Appendix C) Other Options: • See other methods for spicing cables in electrical Chapter 3. • Another method is fabricating a junction by removing the J-801 and J-804 connectors from a C-2298 control box. Solder jumper wires between the corresponding connector pins. Insulate the jumper wires and the rear of the connectors. • A less desirable method is to remove one connector from each cable and splice the corresponding wires from the two cables together insulate the spice. Procedural Steps: 1. Connect a C-2298 control box between the two CX-4723 cables. 2. Record BDAR action taken. When mission is complete, as soon as practical, repair the equipment/system using standard maintenance procedures. 13-17