TM-9-2350-314-10-HR Hand Receipt for M109A6 Paladin Howitzer Download
Page 6 of 32
TM 9-2350-314-10-HR 0001-2 SECTION I. INTRODUCTION (continued) 0001 3. EXPLANATION OF BLOCKS AND COLUMNS (DA FORM 2062) - CONTINUED f. Publication Number. Contains the Technical Manual (TM) number of the TM containing the Operator/Crew instructions for the equipment. g. Publication Date. Date of the Operator/Crew Technical Manual. h. Quantity. Quantity of the end item covered by the hand receipt. i. Stock Number (Column a). National Stock Number (NSN) of the item described. Items without stock numbers should be requisitioned by the Commercial and Government Entity Code (CAGEC), and Part Number with exception data in accordance with AR 710-2, contained in Unit Supply Update. j. Item Description (Column b). Identifies the item contained in the COEI, BII and AAL. It will also contain nomenclature and serial/USA number (if applicable) that will be used in identifying and controlling the item. Serial number is to be inserted and initialed on all copies by hand receipt holder. In addition, it will contain the 5-digit CAGEC, part number (P/N), and “Usable on” code, if applicable. k. When Used As A (Column c). The accounting requirements code (ARC) is inserted here. One of the following ARC's will apply. NOTE The Accounting Requirements Code (ARC) refers to property accountability, not to disposal authority. Disposition action and authority for an unserviceable item is governed by the recoverability code (5th position of the SMR code) assigned to the item in the RPSTL. 1) Refer to DA Pam 710-2-1, Chapter 6. Additional information required to complete DA Form 2062 is listed below. 2) Hand receipts shall identify the accounting requirements status of all line item entries via Column c. One of the following codes will apply: (N) for Nonexpendable: Items not consumed in use, retaining their identity during use, and requiring accountability be maintained throughout the life of the item. (D) for Durable: Nonconsumable components of sets, kits, outfits and assemblages; all tools in FSCs 5120, 5130, 5140, 5180, 5210, 5220, and 5280; and any other nonconsumable with a price in excess of $50.00 not already "N.” (X) for Expendable: Items, regardless of type classification or price and which are consumed in use. Includes all class 9 repair parts. Items not consumed in use which cost $50.00 or less and not already “N" or “D."