TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 77 of 552
TM 9-2350-311-34-2 Do not attempt to pull or pry on either bonded surface after mating or damage to materiel or equip- ment may occur. d. Press mating surfaces together. Use a roller or other suitable tool to ensure full contact between surfaces. 2-17 ELECTRICAL TEST EQUIPMENT AND ELECTRICAL TESTING To use electrical test equipment refer to TM 9-2350-311-20-2. 2-18 SHAFTS, GEARS, AND BEARINGS Most gears and bearings are installed on shafts tightly. Use arbor press, gear pullers, or other appropriate tools for removal and installation. General inspection guidelines for gears and bearings are outlined in para 2-4.1. 2-19 INSTRUCTION AND IDENTIFICATION PLATES This task covers: a. Removal b. Installation INITIAL SETUP Tools Artillery field maintenance tool kit (SC 4933-95-CL-A06) a. Removal NOTE Only replace instruction and identification plates which are damaged or unreadable. Remove all screws securing instruction or identification plate to mounting surface. 2-15