TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 448 of 552
TM 9-2350-311-34-2 CAB AMMUNITION RACK ASSEMBLY — CONTINUED b. Assembly/Installation — Continued 8 Install shims (13) as required, 12 sleeve spacers (12), 12 flat washers (11), and 12 cap screws (10) in cab ammunition rack assembly (3) perimeter. 9 Install shims (9) as required, 20 sleeve spacers (8), 20 flat washers (7), and 20 cap screws (6) in cab am- munition rack assembly (3) perimeter. 10 Install eight flat washers (5) and eight cap screws (4) in cab ammunition rack assembly (3) perimeter. 11 Hold six retainer assemblies (2.1) and 16 retainer assemblies (2) by handles and install in cab ammunition rack assembly (3). NOTE Locking caps are located on cab ammunition rack assembly inside cab. 12 Rotate 31 locking caps (1) to CLOSED position. 12-6 Change 2