TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 416 of 552
TM 9--2350--311--34--2 9--22 Change 3 9--4 GEARSHAFT ASSEMBLY — CONTINUED c. Assembly — Continued 13 Install two new preformed packings (41) and two plugs (40) in mechanical housing (16). 13A Install four plugs (16.1) and four new preformed packings (16.2) in mechanical housing (16). 14 Install new seal (45) in mechanical housing (16) and secure with new retaining ring (44). 15 Install three new packing assemblies (43) and three valve pistons (42) into mechanical housing (16). 16 Position shaft adapter (31) in mechanical housing (16). 17 Install inner bearing ring (38) and roller bearing (39) on shaft adapter (31). 18 Install woodruff key (37) in clutch shaft (35) and install clutch shaft in mechanical housing (16). 19 Install new key washer (33) and round nut (34) on clutch shaft (35). Bend locking tabs of key washer to secure round nut. 20 Install sleeve bearing (32) and shaft coupling half (30) on clutch shaft (35) and secure to shaft adapter (31) using four cap screws (29). 21 Apply sealing compound (item 31, Appx B) to new gasket (27) and install with mechanical housing (16) on traversing mechanism (28) using six new self-locking screws (26). 22 Position and support gearshaft (10) in sleeve bearing (36) and clutch shaft (35). 16.1 16.2