TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 286 of 552
TM 9-2350-311-34-2 6-5 BYPASS VALVE ASSEMBLY This task covers: a. Disassembly b. Inspection c. Assembly INITIAL SETUP Tools Artillery and turret mechanic’ s tool kit (SC 5180-95-CL-A12) Materials/Parts Lockwashers (2) (item 75, Appx E) Lockwashers (4) (item 81, Appx E) Lockwashers (2) (item 158, Appx E) Preformed packing (item 49, Appx E) Preformed packing (item 51, Appx E) Equipment Condition Bypass valve assembly removed (TM 9-2350-311-20-2) a. Disassembly 1 Remove four cap screws (1), four lockwashers (2), and four hex nuts (3). Discard lockwashers. 2 Separate solenoid (4) from spacer (5). 3 Remove two cap screws (6), two lockwashers (7), and body (8) from spacer (5). Discard lockwashers. 4 Remove two cap screws (8.1) and spacer (5) from welded block. 5 Remove two cap screws (9), two lockwashers (10), cap (11), and helical compression spring (12) from body (8). Discard lockwashers. 6 Remove spool (13) from body (8). 7 Remove preformed packings (14 and 15) from spool (13) and discard. b. inspection 1 Inspect body (8) and spool (13). Replace bypass valve body (16) if body or spool is cracked, distorted, scratched, or scored. 2 Inspect helical compression spring (12). Replace if cracked, broken, distorted, or scratched. 6-24 Change 2