TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 251 of 552
TM 9-2350-311-34-2 5-14 ACTUATOR AND FOLLOWER ASSEMBLIES This task covers: a. Removal b. Inspection c. Installation d. Adjustment INITIAL SETUP Tools Lockwire (item 36, Appx E) Artillery and turret mechanic’ s tool kit Self-locking nut (item 41, Appx E) (SC 5180-95-CL-A12) Equipment Condition Materials/Parts Adhesive (item 4, Appx B) Lockwasher (item 72, Appx E) Lockwashers (4) (item 86, Appx E) Cab weather cover removed (TM 9-2350-311-20-2) Upper gun rotor removed (para 5-1) Dust shield and cover removed (TM 9-2350-311-20-2) Cannon at 0 mils a. Removal NOTE l Actuator and follower procedures can be performed while mount and cannon are installed in vehicle. l A maximum of four flat washers may be used per cap screw. 1 Remove self-locking nut (1), flat washer (2), eye bolt (3), and helical spring (4). Discard self-locking nut. 2 Remove lockwire (5), four cap screws (6), washers (7) if present, follower assembly (8), and shim pack (9) if present, from upper left front of trunnion bracket (10). Discard lockwire. Change 2 5-107