TM-9-2350-311-34-2 Maintenance Manual for Volume 2 M109 Cab Download
Page 234 of 552
5-90 TM 9-2350-311-34-2 5-12 VARIABLE RECOIL ASSEMBLY - CONTINUED d. Assembly - Continued NOTE Both inner orifice and front follower groups are identical. Assembly procedures are written for one but apply to both. When replacing seal assemblies, stagger gaps in adjacent rings 180°. 6 To assemble inner orifice and front follower group (25), install new seal assembly (66) on outside of front follower (62). 7 Install front follower (62) on piston rod (65). 8 Install new seal assembly (64) on outside of front retaining plate (61). 9 Install new seal assembly (63) inside shaft hole of front retaining plate (61). 10 Install front retaining plate (61) on front follower (62). 11 Install eight cap screws (60) and new lockwire (59) in front retaining plate (61).