TM-9-2350-311-34-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 70 of 352
TM 9-2350-311-34-1 4-2 REMOVAL AND INSTALLATION OF ENGINE- AND TRANSMISSION-RELATED COMPONENTS — CONTINUED b. Installation — Continued 32 Install new Iockwasher (13) and screw (12) to attach transmission-to-oil cooler hose (11 ) to transmission housing (14). 33 Install hose connector (10) and connect transmission-to-oil cooler hose (11 ). Provide 0.63- to 0.87-in. (16.0- to 22.1 -mm) clearance between exhaust manifold (84) and hose (11 ). 34 Tighten four screws (8) to oil cooler housing (9). 35 Tighten nut (6) and connect oil cooler-to-transmission hose (7). 36 Install two elbows (4) to two filters (5). Remove elbows from ends of engine oil filter-to-oil cooler hose (2) and oil cooler-to-oil filter hose (3). 37 Tighten two hose connector nuts (1) and connect engine oil filter-to-oil-cooler hose (2) and oil cooler-to-oil filter hose (3). 4-14