TM-9-2350-311-34-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 238 of 352
TM 9-2350-311-34-1 SECTION I. FINAL DRIVE ASSEMBLY 8-1 FINAL DRIVE ASSEMBLY This task covers: a. Disassembly b. Assembly Tools General mechanic’s tool kit (item 14, Appx C) Fabricated stand (item 2, Appx D) Torque wrench (item 26, Appx C) Torque wrench (item 28, Appx C) Cotter pin (item 13, Appx F) Gasket (item 83, Appx F) Gasket (item 86, Appx F) Gasket (item 53, Appx F) Gaskets (2) (item 54, Appx F) Grease (item 9, Appx B) Lockwashers (24) (item 37, Appx F) Lockwashers (7) (item 39, Appx F) Seal (item 84, Appx F) Seal (item 46, Appx F) Two Final drive removed (TM 9-2350-311 -20-1 ) a. Disassembly 1 2 3 4 5 6 7 Remove gasket. Remove gasket. Remove Remove Remove Remove Remove seal (1), 12 screws (2), 12 Iockwashers (3), cover (4), and gasket (5). Discard seal, lockwashers, and seven screws (6), seven Iockwashers (7), housing cover (8), and gasket (9). Discard Iockwashers and input splined gearshaft (10) and two bearing races (11 ). two bearing cones (12). cotter pin (13) and nut (14). Discard cotter pin. ring gear (15) and spacer (16). bearing (17). NOTE Step 8 applies only to leaking final drive housings. 8 Remove four screws (18), four Iockwashers (19), input shaft cover (20), and gasket (21 ) from final drive housing (22). Discard Iockwashers and gasket. 8-2