TM-9-2350-311-34-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 118 of 352
TM9-2350-311-34-1 Tools INITIAL SETUP References 5-6 FUEL TANK HEAT SHIELD This task covers: a. Inspection and Repair General mechanic’s tool kit (item 14, Appx C) TM 9-2350-311-20-1 TM 9-237 a. Inspection and Repair 1 2 3 4 5 6 7 Check fuel tank heat shield seals (1) for tearing or deterioration. Replace as required (TM 9-2350-311-20-1). Check supports for cracks or damage. Weld to repair or replace as required (TM 9-237). Check retainers for cracks, damage, or bent areas. Weld to repair, straighten, or replace as required (TM 9- 2350-311-20-1). Check for stripped threads on retainer studs. Drill out and replace welded studs or retainer as required (TM 9- 2350-311-20-1). Check insulation. Replace if deteriorated or burnt (TM 9-2350-311-20-1). Check heat shield body for cracks or broken welds. Weld to repair or replace as required (TM 9-2350-311- 20-1). Check pad (2) for deterioration. Fabricate new pad if required (item 3, Appx D). 5-36