TM-9-2350-311-34-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 106 of 352
TM 9-2350-311-34-1 5-4 FUEL TANK RETAINING STRAPS AND CHANNEL GROUP — CONTINUED c. Assembly 1 Install new pad (18), as required (para 5-3). 2 Connect turnbuckle (15) to side retaining strap (17) and top retaining strap (16). 3 Install new pad (19), as required (para 5-3). 4 Assemble new spring pin (20), stud (12), and nut (13) to channel (11). d. Installation 1 Install flat washer (14), nut (13), stud (12), and channel (11) through hull recess in engine compartment. NOTE Nut and retainer are located inside hull crew compartment at forward bulkhead of CLGP stowage area. 2 Install retainer (10) and nut (9). 3 Install bracket (8) and two screws (7). 4 Install rear retaining strap assembly (6). 5 Install three flat washers (5), three nuts (4), and three screws (3). 6 Install headed pin (2). 7 Install new cotter pin (1). 5-24