TM-9-2350-311-24P-2 Parts Manual Volume 2 for M109 Cab Download
Page 13 of 480
TM 9-2350-311-24P-2 4. Explanation of Columns (Section IV) - (Continued) b. PART NUMBER Index. Part numbers in this index are listed by part number in ascending alphanumeric sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group in order A through Z, followed by numbers 0 through 9 and each following letter or digit in like order). (1) CAGEC Column. The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. (2) PART NUMBER Column. Indicates the primary number used by the manufacturer (individual, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engi- neering drawings specifications standards, and inspection requirements to identify an item or range of items. (3) STOCK NUMBER Column. This column lists the NSN for the associated part number and manufac- turer identified in the PART NUMBER and CAGEC columns to the left. (4) FIG. Column. This column lists the number of the figure where the item is identified/located in Sec- tions II and III. (5) ITEM Column. The item number is that number assigned to the item as it appears in the figure referenced in the adjacent figure number column. 5. Special Information. a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading. Usable on codes are shown as “UOC: . . . ” in the description column (justified left) on the first line applicable item description/nomenclature. Uncoded items are applicable to all models. Identification of the usable on codes used in the RPSTL are: Code G78 AA5 G56 AH9 L99 762 U38 L97 L95 V48 Used On Model M109A3 Model M109A4 Model M109A2 Model M109A5 M15 Elevation Quadrant M42 Periscope M117 Panormaic Telescope M117A2 Panormaic Telescope M118A2 Elbow Telescope M118A3 Elbow Telescope L98 M145 Telescope Mount V36 M145A1 Telescope Mount L96 M146 Telescope Mount b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material functional group of this RPSTL. Part numbers for bulk materials are also referenced in the description column of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for item source codes to be manufactured or fabricated are found in TM 9-2350-311 -20-2 and TM 9-2350-311-34-2. c. ASSEMBLY INSTRUCTION. Detailed assembly instructions for items source coded to be assembled from component spare/repair parts are found in TM 9-2350-31120-2 and TM 9-2350-311 -34-2. Items that make up the assembly are listed immediately following the assembly item entry or reference is made to an applicable figure. d. KITS. Line item entries for repair parts kits appear at the end of the associated parts list. e. INDEX NUMBERS. Items which have the word BULK in the figure column will have an index number shown in the item number column. This index number is a cross-reference between the National Stock Number/Part Number Index and the Bulk Material List in Section II. 5