TM-9-2350-311-24P-1 Maintenance Manual Volume 1 for M109 Hull Download
Page 14 of 637
TM 9-2350-311-24P-1 D -Depot is the lowest level that can do complete repair of the item. Z -Nonrepairable. No repair is authorized. B -No repair is authorized. (No parts or special tools are authorized for the maintenance of a “B” coded item.) However, the item may be reconditioned by adjusting, lubricating, etc., at the user level. (3) Recoverabilitycode Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR Code as follows: Recoverability Application/Explanation Codes Z -Nonrepairable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in 3rd position of SMR Code. O -Repairable item. When uneconomically repairable, condemn and dispose of the item at unit or aviation unit level. F -Repairable item. When uneconomically repairable, condemn and dispose of the item at the direct support or aviation intermediate level. H -Repairable item. When uneconomically repairable, condemn and dispose of the item at the general support level. D -Repairable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below depot level. L -Repairable item. Condemnation and disposal not authorized below Specialized Repair Activity (SRA). A -Item requires special handling or condemnation procedures because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. c. CAGEC(Column(3)). The Commercial and Government Entity Code (CAGEC) is a 5-digit numeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. d. PART NUMBER(Column(4)). Indicates the primary number used by the manufacturer (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items. NOTE: When you use a NSN to requisition an item, the item you receive may have a different part number from the part ordered. e. This column includes the following information: (1) The federal item name, and when required, a minimum description to identify the item. (2) The physical security classification of the item is indicated by the applicable parenthetical entry (e.g., Phy Sec Cl (C) - Confidential, Phy Sec Cl (S) - Secret, Phy Sec Cl (T) - Top Secret). 4 DESCRIPTION AND USABLE ON CODE (UCO)(Column (5)).