TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 76 of 828
TM 9–2350–311–20–2 Change 2 2–15 2–7 DECALS, LABELS, AND INSTRUCTION SIGNS This task covers: a. Removal b. Installation INITIAL SETUP Tools Artillery and turret mechanic’s tool kit (SC 5180–95–CL–A12) Materials/Parts Decal Cleaning compound (item 9.1, Appx D) Instruction sign Label a. Removal NOTE • Only replace decals, labels, and instruction plates which are damaged or unreadable. • Perform step 1 for self-adhesive decals, labels, and instruction plates. • Perform step 2 for plates with hardware. 1 Scrape label from mounting surface. Discard label. 2 Remove all screws and washers securing instruction plate to mounting surface. Retain screws and washers for assembly. b. Installation WARNING Solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If solvent gets on skin or clothing, wash immediately with soap and water. NOTE • Perform steps 1 through 3 for self-adhesive decals, labels, and instruction plates. • Perform step 4 for instruction plates with hardware. 1 Clean mounting surface using cleaning compound. 2 Remove paper backing from new label and position in place on mounting surface. 3 Press label firmly to remove air bubbles from under label. 4 Secure instruction plates to mounting surface using screws and washers retained from removal.