TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 713 of 828
TM 9–2350–311–20–2 Change 2 19–5 5 Rotate cover (7) to the open position. Tighten top cap screw (6) to hold cover in open position. 6 Remove valve cap (8) from check valve (9). 7 Attach M3 oil pump (4) to check valve (9). Fill piston until two pins (5) extend not less than 1/8 inch (3.2 mm). Do not overfill (piston requires about 0.5 pint (0.2 l)). After filling, disconnect M3 oil pump. 8 Install valve cap (8). 9 Loosen top cap screw (6), then rotate cover (7) to the closed position. 10 Tighten two cap screws (6). 8 9 6 5 4 6 7 3