TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 701 of 828
TM 9–2350–311–20–2 Change 2 18–33 c. Disassembly NOTE Refer to either the early design or later design illustrations when performing these procedures. 1 Remove air valve cap (6), valve core (7), purging valve stem (8) and strap (9). 2 Remove exit port machine screw (10). 3 Remove machine screw (11), lockwasher (12), electrical cover (13), spacer (14), and LED (15). Discard lockwasher. 4 Disconnect extension light assembly (16) from rear of M15 quadrant (4). 5 Remove lens (17) and LED (18) from extension light assembly (16). d. Assembly 1 Install LED (18) and lens (17) in extension light assembly (16). 2 Connect extension light assembly (16) to rear of M15 quadrant (4). 3 Install spacer (14) onto LED (15). 4 Install LED (15) with spacer (14), electrical cover (13), new lockwasher (12), and machine screw (11). 5 Install exit port machine screw (10). 6 Apply sealing compound to purging valve stem (8) threads. 7 Install strap (9), purging valve stem (8), valve core (7), and air valve cap (6). LATER DESIGN 17 18 16 10 9 8 7 6 13 15 10 11 12 EARLY DESIGN 14