TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 632 of 828
TM 9–2350–311–20–2 15–26 Change 2 15–12 CANNISTER STOWAGE BRACKET ASSEMBLY — CONTINUED b. Installation NOTE Apply zinc chromate paste between contact surfaces where aluminum meets steel. Apply sealing compound to all machine screws before installing. 1 Slide bracket assembly (14) into place and install 14 machine screws (19). 2 Install six new self-locking nuts (18), six flat washers (17), two angle brackets (16), and six machine screws (15) on two vertical brackets on bracket assembly (14). 3 Install four loop clamps (7) using two cap screws (6), two machine screws (8), four new lockwashers (5), and four hex nuts (4). 4 Install cannoneer no. 1’s orifice connector bracket (13) using machine screw (11), new lockwasher (12), and hex nut (10). 5 Install NBC hose (9) in loop clamps (7). 6 Install retaining strap (3), three retaining straps (2), and four retaining straps (1). 18 17 16 15 14 5 4 8 19 14 7 13 12 11 6 7 9 10 5 4 1 2 3