TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 582 of 828
TM 9–2350–311–20–2 14–18 Change 3 14–5 CAB SIDE DOORS, LEFT AND RIGHT — CONTINUED b. Disassembly NOTE Step 1 applies only to vehicles with slotted catch strike. 1 Remove two cap screws (10), two lockwashers (11), slotted catch strike (11.1) and pin (11.2). Discard pin and lockwashers. 2 Remove two cap screws (10), two lockwashers (11), and catch strike (12) . Discard lockwashers. 3 Remove handle assembly (13) from left cab side door (1) by removing two cap screws (14). 4 Remove two cap screws (15), plate spacer(s) (16), and plate spacer (17). 5 Remove self-locking nut (18), flat washer (19), and door handle (20) from door mounting handle (21). Dis- card self-locking nut. 6 Remove knob (22) from threaded straight pin (23). This will release compression helical spring (24). 7 Remove and discard seal (25) and strip (25.1). Clean dirt and old adhesive from seal seat. 8 Remove two cap screws (26). 1 14 13 15 16 17 12 11 10 10 11 11.2 11.1