TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 554 of 828
TM 9–2350–311–20–2 12–12 Change 2 12–3 CUPOLA COVER, BODY, AND HANDLE — CONTINUED c. Assembly — Continued NOTE Step 14 applies to cupola covers without outside handle. 14 Install cupola cover handle (15) using two new lockwashers (14) and two machine bolts (13). WARNING Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive gets on skin or clothing, wash immediately with soap and water. NOTE If commander’s cupola does not have drain holes perform step 15. If commander’s cupola has drain holes perform step 15.1. 15 Apply adhesive to new cover seal (12) and cupola cover (1). Allow to set 15 minutes then attach cover seal to cupola cover. 15.1 Apply epoxy adhesive to new gasket (12) and cupola cover (1). Allow to set 15 minutes than attach gasket to cupola cover. NOTE Perform step 16 for commander’s cupola with hook latch assembly or steps 16.1 through 16.3 for commander’s cupola with knob latch assembly. 16 Install straight pin (11) and new spring pin (10). 13 12 10 11 1 14 15