TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 515 of 828
TM 9–2350–311–20–2 Change 2 9–13 2 Connect five electrical leads at quick disconnects (9). NOTE Do not tighten cap screws until adjustment is completed. 3 Install electrical contact arm (5) on hull using four cap screws (6) and four new lockwashers (7). New shims (8) should be used as necessary to secure correct clearance (para 9–3f.). 4 Using two cap screws (3) and two new lockwashers (4), attach free end of two ground straps (1) and ground wire (2) from harness to hull. 5 Adjust electrical contact arms (5) to segment board (para 9–3f.). 9 100 GND 100 GND 41 42 43 L1 L2 8 7 6 5 4 3 2 1 1