TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 353 of 828
TM 9–2350–311–20–2 Change 2 6–37 b. Disassembly 1 Remove self-locking nut (14) and machine screw (15). Discard self-locking nut. 2 Separate handle (16) from hydraulic pump (7). c. Inspection 1 Inspect handle (16). Replace if cracked, distorted, or damaged. 2 Inspect hydraulic pump (7). Replace if not operable, or if threads to suction port (17) or pressure port (18) are damaged. d. Assembly 1 Insert handle (16) into hydraulic pump (7) alining holes for machine screw (15). 2 Install machine screw (15) and new self-locking nut (14) to secure handle (16) to hydraulic pump (7). e. Installation 1 Install two cap screws (12), two new lockwashers (13), and mounting bracket (11). 2 Secure hydraulic pump (7) to mounting bracket (11) with two cap screws (8), two new lockwashers (9), and two hex nuts (10). 3 Install new preformed packing (6), reducer (5), clinch sleeve (4), coupling nut (3), new preformed packing (2), and adapter (1). 16 7 18 17