TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 340 of 828
TM 9--2350--311--20--2 6--24 Change 4 6--8 CLUTCH VALVE — CONTINUED b. Installation 1 If removed, install mounting bracket (7) and secure with two new lockwashers (9) and two machine screws (8). 2 Install clutch valve (6) and secure with two new lockwashers (5) and two cap screws (4). 3 Install new insulation sleeving (3.1), if removed. 4 Install three new preformed packings (3) and three elbows (2) with attached lines. Remove tags. 5 Install heat shield (1.3) over clutch valve (6) and secure with new lockwasher (1.2) and hex nut (1.1). 6 Connect electrical connector (1). 7 Check hydraulic fluid level (para 6--2).