TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 334 of 828
TM 9–2350–311–20–2 6–18 Change 2 6–4 POWER PACK STRAINER This task covers: a. Removal b. Installation INITIAL SETUP Tools Artillery and turret mechanic’s tool kit (SC 5180–95–CL–A12) Socket wrench (item 16, Appx H) Materials/Parts Adhesive (item 1, Appx D) Cleaning compound (item 9.1, Appx D) Equipment Condition Tow cable and cab access cover removed (para 14–11) a. Removal 1 Remove power pack gage (1). 2 If necessary for replacement, remove preformed packing (2). NOTE Clean around filter element recess before removing filter element. Dirt may fall into power pack res- ervoir and contaminate hydraulic fluid. 3 Use socket wrench to remove filter element (3). WARNING Adhesives and solvents can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If adhe- sive or solvent gets on skin or clothing, wash immediately with soap and water. 4 Clean filter element (3) in cleaning compound. b. Installation 1 Use socket wrench to install filter element (3). 2 If removed, apply adhesive to preformed packing (2) and install on power pack gage (1). 3 Install power pack gage (1) in power pack reservoir. 3 1 2