TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 321 of 828
TM 9–2350–311–20–2 6–5 b. Disassembly 1 Remove four tapping screws (13) and mounting bracket (14) from instruction plate (15). 2 Remove four tapping screws (16) and sight gage bracket (17) from instruction plate (15). 3 Remove screw (18) and pointer handle (3). 4 Remove elbow (19) and adapters (20 and 21) from valve assembly (22). 5 Remove two hex nuts (23), two lockwashers (24), and two machine screws (25). Remove valve assembly (22) and flat washer(s) (26) from sight gage bracket (17). Discard lockwashers. 6 Remove flat washer (27), clinch sleeve (28), and nonmetallic tubing (29) from adapter (21). c. Assembly 1 Install clinch sleeve (28), flat washer (27), and nonmetallic tubing (29) on adapter (21). 2 Install adapters (20 and 21) and elbow (19) on valve assembly (22). 3 Install flat washer(s) (26) on valve assembly (22). Add or subtract flat washer(s), as required, to aline non- metallic tubing (29) on sight gage (1). Using two machine screws (25), two new lockwashers (24), and two hex nuts (23), attach valve assembly (22) to sight gage bracket (17). 4 Install pointer handle (3) and screw (18). 5 Install sight gage bracket (17) and four tapping screws (16) on instruction plate (15). 6 Install mounting bracket (14) and four tapping screws (13) on instruction plate (15). 16 17 13 14 15 29 27 28 21 24 23 25 18 3 26 19 20 22