TM-9-2350-311-20-2 Maintenance Manual Volume 2 for M109 Cab Download
Page 282 of 828
TM 9--2350--311--20--2 5--26 Change 4 5--9 CARRIER ASSEMBLY — CONTINUED d. Assembly -- Continued NOTE • Check for markings “L” and “R” to be sure plungers are installed in correct holes. 3 Deleted 4 Deleted 5 Deleted 6 Deleted 7 Deleted 8 Deleted 9 Deleted 10 Install plunger assembly (32) in carrier assembly (4) and secure with two cap screws (31) and new lockwire (30). 11 Install helical compression spring (11), right disc (10), right sleeve bushing (9), and right carrier detent plunger (6). 12 Install right detent plunger (8) to restrain right carrier detent plunger (6). 13 Install left disc (15), left sleeve bushing (14), and left carrier detent plunger (13). 14 Install left detent plunger (12) to restrain left carrier detent plunger (13). NOTE When installing spur gear into carrier assembly, the arrow of the spur gear must be alined with arrow on gear rack . After arrows are alined on spur gear, center arrows in inspection hole at bottom of carrier assembly before installing carrier assembly on breech ring. If arrows are not visible on spur gear and gear rack, scribe third tooth of spur gear and third root of gear rack as shown. 15 Aline arrows on spur gear (7) and gear rack (39), then install spur gear (7) into carrier assembly (4).