TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 999 of 1275
TM 9-2350-311 -20-1 11-4 DRIVER’S HATCH COVER AND LOCK COMPONENTS — CONTINUED a. Removal — Continued 11 Remove 12 Remove 13 Remove 14 Remove spring (33), nut (34), flat washer (35), and handle (36). nut (37) and washer (38). two screws (39), two washers (40), and holding lever stop (41 ). spring pin (42), hatch stop (43), locking shaft (44), bumper (45), and locking sleeve (46). Discard spring pin. b. Installation 1 Install locking sleeve (46), bumper (45), locking shaft (44), hatch stop (43), and new spring pin (42). 2 Install lever stop (41), two washers (40), and two screws (39). Install washer (38) and nut (37). 3 Install handle (36), flat washer (35), and nut (34). 4 Install spring (33). 11-20