TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 971 of 1275
TM 9-2350-311 -20-1 10-22 FINAL DRIVE ASSEMBLIES — CONTINUED a. Removal — Continued Oil is hazardous waste and must be disposed of in accordance with local procedures or direction of the local Hazardous Waste Management office. 4 Remove drain plug (6) and drain oil from final drive assembly (7). 5 Remove two screws (8) and two Iockwashers (9). Discard Iockwashers. 6 Install two guide pins in screw holes. 7 Remove six screws (10) and six Iockwashers(11 ). Leave top screw (12) and Iockwasher (13) in place. Discard Iockwashers. 8 Remove five screws (14), five Iockwashers (15), five flat washers (1 6), and five nuts (17). Discard Iockwashers. 9 Remove cap screw (18) at top of housing and install lifting eye bolt. 10 Attach lifting sling to eye bolt and to hoist. 11 Remove top screw (12) and Iockwasher (13). Discard Iockwasher. 12 Slide final drive assembly (7) away from vehicle. 13 Remove two guide pins. 10-54 WARNING