Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download

Page 970 of 1275

TM 9-2350-311-20-1 10-22 FINAL DRIVE ASSEMBLIES This task covers: a. Removal b. Inspection c. Installation Tools General mechanic’s tool kit (item 64, Appx H) Eye bolt (item 5, Appx H) Guide pins (2) (item 38, Appx H) Lifting sling (item 58, Appx H) Socket wrench set (item 56, Appx H) Torque multiplier (item 37, Appx H) Torque wrench (item 71, Appx H) Materials/parts Gasket (item 121, Appx G) LockWashers (14) (item 93, Appx G) Lockwashers (12) (item 96, Appx G) Lubricating oil (item 45, Appx D) Zinc chromate primer (item 54, Appx D) Personnel Required Two Equipment Conditions Final drive sprocket and hub removed (para 10-21) a. Removal NOTE Final drive and bearing retaining nut may be inspected while installed in vehicle. See inspection procedure below. 1 Remove screw (1), washer (2), and clamp (3). 2 Unscrew tube hex nut connector (4). 3 Remove vent tube (5). 10-53