TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 924 of 1275
TM 9-2350-311-20-1 2 Install end connector puller. Tighten two screws (4) against ends of track link pins (5). 3 Tighten two screws (4) until end connector (3) moves out approximately 1 in. (25.4 mm). Repeat for remaining three end connectors. NOTE Tighten both fixtures equally removing tension from shoe or track connectors being removed. 4 Install track-connecting fixtures on both ends of shoe being removed, engaging track link pins (5) on adjacent shoes. Hold ends of track until shoe is replaced. 5 Remove four end connectors (3), end connector puller with screws (4), and track shoe (6). 10-7