TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 919 of 1275
TM 9-2350-311-20-1 SECTION I. TRACKS 10-1 SUSPENSION IDENTIFICATION (ID) Removal and installation procedures are shown for: Track pads (para 10-2, T-136 track; para 10-4, T-154 track) Track shoes (para 10-4, T-136 track; para 10-6, T-154 track) Road wheels (para 10-10) Road wheel arms (para 10-12) Torsion bars (para 10-13) Torsion bar anchors (para 10-14) Track adjusters and mounting brackets (para 10-15) Idler wheels and hubs (para 10-16) Idler arm assemblies (para 10-17) Idler arm housings (para 10-18) Shock absorbers and mounts (para 10-19) Shock absorber bearings (para 10-20) Final drive sprockets and hubs (para 10-21) Final drive assemblies (para 10-22) Universal joints (para 10-23) Disassembly and assembly procedures are given for road wheel hubs (para 10-11) and idler arm assemblies (para 10- 17). This chapter also illustrates and installation of thrown tracks (para 10-7, T-154 track). describes disconnecting tracks (para 10-4, T-136 track; para 10-5, T-154 track), 10-6, T-136; para 10-7, T-154), and track replacement (para 10-6, T-136 track; para Checking and adjusting of track tension are described in paragraph 10-8. Notify support maintenance for disassembly and assembly of road wheel arm upper spindle and housing groups. Vehicle suspension system is illustrated. Numbers 1 thru 7 refer to road wheel removal procedures in paragraph 10-10. 10-2