TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 908 of 1275
TM 9-2350-311-20-1 9-15 HAND THROTTLE GOVERNOR CONTROL ROD This task covers: Adjustment General mechanic’s tool kit (item 64, Appx H) Cotter pin (item 43, Appx G) Adjustment 1 2 3 4 5 6 NOTE A 0.25-in. - (6.4-mm-) diameter dowel pin may be used. Insert 0.225-in. - (5.72-mm-) diameter dowel pin in positioning hole (1) of throttle lever cover (2). Remove cotter pin (3), flat washer (4), and clevis pin (5). Discard cotter pin. Remove control rod (6) from throttle lever (7). Insert 0.225-in. - (5.72-mm-) Loosen nut (9). Adjust rod end (10) until pin diameter dowel pin in positioning hole (8) in throttle lever and bulkhead. (5) can be inserted easily. 9-53