TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 903 of 1275
TM 9-2350-311-20-1 9-11 ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR — CONTINUED d. Installation — Continued 14 15 16 17 18 Install two flat washers (14) and new cotter pin (13) at end of rod assembly (15) at engine throttle control lever (8). Install quick-release pin (11) at bell crank (12). Install throttle control lever (8), washer (10), and screw (9) if damaged or requiring replacement at transmission. install rod assembly (7), spring (6), three flat washers (5), and two new cotter pins (4) (8). Install pin (2) and new cotter pin (1) at bell crank (3) to install linkage in powerplant. at throttle control lever 9-48