TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 900 of 1275
TM 9-2350-311-20-1 5 Install cap (67) and bearing (68) onto bracket (69). Install three new lockwashers (66) and three screws (65). 6 Install two screws (59), two new lockwashers (60), cap (62), and bearing (63) to bracket (64) to assemble bracket support assembly (61). 7 Replace bearings (58) if damaged. Install lever (54) and bell crank (55) by pushing shaft (53) into bracket (56). Install two new spring pins (52) to assemble bracket assembly (57). 8 Install nut (49) and tighten after screwing rod ends (50) onto shaft (51) to assemble rod assemblies. 9-45