TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 90 of 1275
2-15 PROCEDURES FOR SEMIANNUAL/ANNUAL SERVICES — CONTINUED TABLE 2-1 UNIT PMCS FOR M109A2/M109A3/M109A4/M109A5 HOWITZERS — CONTINUED NOT FULLY ITEM ITEM TO BE MISSION NO. INTERVAL INSPECTED PROCEDURE CAPABLE IF: 34 Annual Engine Governed Test engine for acceleration and power in each gear. If governed Speed and While testing in first gear, accelerate with wide open speed under Performance throttle from low speed to top speed. Governed speed load exceeds under load should not exceed 2300 rpm. Maximum 2300 rpm. speeds are as follows: 1 st 6 mph 10 km/h 2nd 9 mph 14 km/h 3rd 24 mph 39 km/h 4th 35 mph 56 km/h R1 5 mph 8 km/h R2 7 mph 11 km/h 35 Annual Leakage from Inspect all areas inside and outside of vehicle for fuel or Any fuel or class Powerplant or Cab oil leaks. Ill leaks. Hydraulic Systems 2-15.9 PMCS Parts List The following parts are required when performing semiannual, annual, or on-condition PMCS. The semiannual/annual parts list contains the mandatory replacement parts for one semiannual PMCS or one annual PMCS. The on-condition parts list contains replacement parts that are required when engine and transmission oil changes are directed by the AOAP Laboratory. If AOAP Laboratory support is not available, change oil and filter elements/gaskets every 1500 miles (2414 km) or 150 hours. SEMIANNUAL (1 500 MILES [2414KM] OR 150 HOURS)/ ANNUAL (3000 MILES [4828 KM] OR 300 HOURS) PARTS LIST ITEM NO. 1 2 3 4 5 6 7 PART NUMBER 5575032 CW226MP 5574161 10861673 7413738 7413775 7413774 NSN 2940-00-745-7730 2910-00-287-1912 5330-00-846-9841 2910-00-893-6402 5330-00-265-1089 5330-00-893-6402 5330-00-741-3774 NOMENCLATURE Filter element Filter element Gasket Strainer element Packing, preformed Strainer element Gasket QTY 1 1 1 1 1 1 1 2-42 TM 9-2350-311-20-1