TM-9-2350-311-20-1 Maintenance Manual for Volume 1 M109 Hull Download
Page 897 of 1275
TM9-2350-311-20-1 9-11 ACCELERATOR, THROTTLE, AND ENGINE CONTROL GOVERNOR — CONTINUED a. Removal — Continued 13 14 15 16 17 Remove pin (30) and lever (31). NOTE Remove inserts (32 and 33) only if threads are damaged and inserts must be replaced. Remove three screws (34), three lockwashers (35), and three inserts (32) at bracket support assembly (36). Discard Iockwashers. Remove bracket support assembly (36) from bulkhead. Remove cotter pin (37) and pin (38) at end of throttle control rod (39) for removal of linkage in driver's compartment. Discard cotter pin. NOTE Throttle control rod (39) is part of hand throttle control assembly (40). Remove screw (41), key washer (42), and throttle control assembly (40). Remove insert (33) if necessary. Discard key washer. 9-42